by Mick Martin | Sep 14, 2018 | Knowledge Base
Artist can be controlled with simple text message sent across Ethernet using a TCP/IP connection. Artist responds to the Text Commands as define in the help section Automation. Input Output Patch/Network Remotes – right click and select Properties Check Enable...
by Mick Martin | Nov 22, 2016 | Knowledge Base
TouchOSC is an iPad app that sends MIDI messages wrapped in OSC data packets over network connections. See the web site http://hexler.net/software/touchosc Visit the Apple app store and install the TouchOSC app on any iPad you wish to connect to...
by admin | Jun 24, 2016 | Knowledge Base
You can add the UPD Output system command to a cue to send strings to a specific target IP. Registry Settings The UPD ports are defined in the Windows Registry. From the Run window enter ‘regedit’ and click Run. The registry editor will open.Navigate to...
by Mick Martin | May 11, 2016 | Knowledge Base
The KiNet protocol distributes DMX lighting data via Ethernet for Philips/Color Kinetics power supply interfaces. KiNet does not provide for a discovery method which requires that the IP address of each Power Supply/Interface is added...
by Mick Martin | Dec 24, 2012 | Knowledge Base
Introduction Pathport is a protocol for distributing DMX data across Ethernet using inexpensive CAT5 cabling. This cabling is common place in buildings for distributing IT networks and therefore electricians are quite familiar with its use. Connection to...
