by Mick Martin | Aug 29, 2012 | Knowledge Base
This procedure sets up one 8 port XNet interface on Artnet. Computer Setup Set the IP address of the Ethernet port on the Artist computer to 2.0.0.1 and the sub-net mask to 255.0.0.0Start ArtistRight-click Navigator/Resources/Interface Manager/Artnet and select... by Mick Martin | Mar 21, 2012 | Knowledge Base
The X-Net 8 has an inexplicably complicated switch setting. In this article I do my best to explain it. The possible addresses are in the range 2.39.2.4 to 2.39.2.250. Each address setting occupies 2 address slots. So, for example, Sw1 = 1, Sw2 = 3, Sw3 = 0... by Bob Calvert | Feb 27, 2012 | Knowledge Base
Introduction Artnet is the license-free protocol for distributing DMX over TCP/IP packets in local area network systems. Artnet is supported by a wide range of DMX devices. We recommend that Artnet is used on a private network since it does... by Mick Martin | Feb 23, 2012 | Knowledge Base
Introduction DMX 512 is the primary protocol for communicating with lighting fixtures. Since its inception in the 80’s it has become ubiquitous in the lighting industry. It is a serial communication that allows for fixtures to be daisy-chained along the...